<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD v1.2 20190208//EN"
  "https://jats.nlm.nih.gov/publishing/1.2/JATS-journalpublishing1.dtd">
<article xmlns:xlink="http://www.w3.org/1999/xlink"
         xmlns:mml="http://www.w3.org/1998/Math/MathML"
         article-type="research-article"
         dtd-version="1.2">

  <front>

    <journal-meta>
      <journal-id journal-id-type="publisher-id">AJM</journal-id>
      <journal-title-group>
        <journal-title>Academia Journal of Medicine</journal-title>
        <abbrev-journal-title abbrev-type="publisher">AJM</abbrev-journal-title>
      </journal-title-group>
      <issn pub-type="epub">2663-8290</issn>
      <publisher>
        <publisher-name>ACS Publisher</publisher-name>
        <publisher-loc>India</publisher-loc>
      </publisher>
    </journal-meta>

    <article-meta>

      <article-id pub-id-type="doi">10.48165/ajm.2026.9.02.03</article-id>
      <article-categories>
        <subj-group subj-group-type="heading">
          <subject>Research Article</subject>
        </subj-group>
      </article-categories>

      <title-group>
        <article-title>Zygomatic Implants in Modern Implant Dentistry: A Comprehensive Review</article-title>
      </title-group>

      <contrib-group>

        <contrib contrib-type="author" id="AU1">
          <name>
            <surname>Gupta</surname>
            <given-names>Dr  H L</given-names>
          </name>
          <xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
          <xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
          <xref ref-type="aff" rid="aff3"><sup>3</sup></xref>
          <xref ref-type="aff" rid="aff4"><sup>4</sup></xref>
          <xref ref-type="aff" rid="aff5"><sup>5</sup></xref>
          <xref ref-type="aff" rid="aff6"><sup>6</sup></xref>
        </contrib>

        <contrib contrib-type="author" id="AU2">
          <name>
            <surname>Bhatt</surname>
            <given-names>Dr  Sumit</given-names>
          </name>
          <xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
          <xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
          <xref ref-type="aff" rid="aff3"><sup>3</sup></xref>
          <xref ref-type="aff" rid="aff4"><sup>4</sup></xref>
          <xref ref-type="aff" rid="aff5"><sup>5</sup></xref>
          <xref ref-type="aff" rid="aff6"><sup>6</sup></xref>
        </contrib>

        <contrib contrib-type="author" id="AU3">
          <name>
            <surname>Yadav</surname>
            <given-names>Dr  Rajnee</given-names>
          </name>
          <xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
          <xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
          <xref ref-type="aff" rid="aff3"><sup>3</sup></xref>
          <xref ref-type="aff" rid="aff4"><sup>4</sup></xref>
          <xref ref-type="aff" rid="aff5"><sup>5</sup></xref>
          <xref ref-type="aff" rid="aff6"><sup>6</sup></xref>
        </contrib>

        <contrib contrib-type="author" id="AU4">
          <name>
            <surname>Byrappa</surname>
            <given-names>Dr  Brijesh</given-names>
          </name>
          <xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
          <xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
          <xref ref-type="aff" rid="aff3"><sup>3</sup></xref>
          <xref ref-type="aff" rid="aff4"><sup>4</sup></xref>
          <xref ref-type="aff" rid="aff5"><sup>5</sup></xref>
          <xref ref-type="aff" rid="aff6"><sup>6</sup></xref>
        </contrib>

        <contrib contrib-type="author" id="AU5">
          <name>
            <surname>Sharma</surname>
            <given-names>Dr  Suchita</given-names>
          </name>
          <xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
          <xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
          <xref ref-type="aff" rid="aff3"><sup>3</sup></xref>
          <xref ref-type="aff" rid="aff4"><sup>4</sup></xref>
          <xref ref-type="aff" rid="aff5"><sup>5</sup></xref>
          <xref ref-type="aff" rid="aff6"><sup>6</sup></xref>
        </contrib>

        <contrib contrib-type="author" id="AU6">
          <name>
            <surname>Upadhyay</surname>
            <given-names>Dr  Tripti</given-names>
          </name>
          <xref ref-type="aff" rid="aff1"><sup>1</sup></xref>
          <xref ref-type="aff" rid="aff2"><sup>2</sup></xref>
          <xref ref-type="aff" rid="aff3"><sup>3</sup></xref>
          <xref ref-type="aff" rid="aff4"><sup>4</sup></xref>
          <xref ref-type="aff" rid="aff5"><sup>5</sup></xref>
          <xref ref-type="aff" rid="aff6"><sup>6</sup></xref>
        </contrib>

      </contrib-group>

      <aff id="aff1">
        <label>1</label>
        <institution>HOD &amp; Professor, Principal, Department of Periodontology and Oral Implantology, Rajasthan Dental College and, Hospital, Nirwan University, Jaipur, Rajasthan.</institution>
      </aff>

      <aff id="aff2">
        <label>2</label>
        <institution>PhD Scholar, Assistant Professor, Department of Oral and Maxillofacial Surgery, Rajasthan Dental College &amp; Hospital, Nirwan University, Jaipur, Rajasthan.</institution>
      </aff>

      <aff id="aff3">
        <label>3</label>
        <institution>Associate Professor, Department of Prosthodontics, Eklavya Dental College &amp; Hospital, Kotputli, Jaipur, Rajasthan.</institution>
      </aff>

      <aff id="aff4">
        <label>4</label>
        <institution>Dental Surgeon &amp; Implantologist, Dental Experts A Super Speciality Dental Clinic, Bangalore, Karnataka.</institution>
      </aff>

      <aff id="aff5">
        <label>5</label>
        <institution>Associate Professor, Department of Prosthodontics, Crown &amp; Bridge and Oral Implantology, Rajasthan Dental College and Hospital, Jaipur, Rajasthan.</institution>
      </aff>

      <aff id="aff6">
        <label>6</label>
        <institution>Senior Lecturer, Department Prosthodontics, Kalinga Institute of Dental Sciences, Kalinga Institute of Industrial Technology (KIIT) Deemed to be University, Bhubaneswar, Odisha.</institution>
      </aff>

      <author-notes>
        <corresp id="COR1">
          <label>*</label>
          E-mail: <email>hlgupta7@yahoo.co.in</email>
        </corresp>
      </author-notes>

      <pub-date pub-type="epub">
        <year>2026</year>
      </pub-date>

      <volume>9</volume>
      <issue>2</issue>
      <fpage>11</fpage>
      <lpage>17</lpage>
      <issue-title>July-December</issue-title>

      <permissions>
        <copyright-year>2026</copyright-year>
        <copyright-holder>ACS Publisher Journal</copyright-holder>
      </permissions>

      <abstract>
        <p>Zygomatic implants have emerged as a predictable graftless solution for the rehabilitation of patients with severe maxillary atrophy, extensive bone loss, and failed conventional implant therapy. By anchoring in the zygomatic bone, they reduce the need for complex bone grafting and facilitate immediate loading in selected cases. Recent advances in implant design, digital planning, guided surgery, and prosthetic rehabilitation have significantly improved treatment outcomes. This review highlights the evolution, indications, implant design, surgical techniques, digital workflow, clinical outcomes, complications, and recent innovations in zygomatic implantology. Current evidence supports zygomatic implants as a reliable and effective treatment option with high long-term survival rates for the rehabilitation of the severely resorbed maxilla.</p>
      </abstract>

      <kwd-group kwd-group-type="author">
        <title>Keywords</title>
        <kwd>Zygomatic implants</kwd>
        <kwd>Implant rehabilitation</kwd>
        <kwd>Digital dentistry</kwd>
      </kwd-group>

      <funding-group>
        <funding-statement>No specific funding was received for this study.</funding-statement>
      </funding-group>

    </article-meta>
  </front>

  <body>

    <sec id="S1">
      <title>Introduction</title>
      <p>The
rehabilitation of patients with severe maxillary bone resorption remains one of
the greatest challenges in implant dentistry.<sup>1</sup> Progressive alveolar
bone loss following tooth extraction, periodontal disease, trauma, congenital
deformities, maxillary sinus pneumatization, and tumor resection often results
in inadequate bone volume for the placement of conventional dental implants.
Traditionally, these patients required extensive reconstructive procedures,
including autogenous bone grafts, sinus floor augmentation, Le Fort I osteotomy
with interpositional grafts, or distraction osteogenesis. Although these
procedures can provide satisfactory outcomes, they are associated with
increased surgical morbidity, prolonged treatment duration, donor-site
complications, additional costs, and variable graft resorption.<sup>2,3</sup></p>
      <p>The concept
of zygomatic implants was introduced by Professor Per-Ingvar Brånemark in the
late 1980s as an innovative alternative for rehabilitating patients with
severely atrophic maxillae. Unlike conventional implants, zygomatic implants
are considerably longer (typically 30–55 mm) and obtain primary stability by
anchoring within the dense cortical bone of the zygomatic body rather than
relying solely on the deficient alveolar ridge. This unique anchorage enables
clinicians to provide fixed implant-supported prostheses even in cases where
conventional implant placement is impossible without extensive bone
augmentation.</p>
      <p>Initially
developed for patients undergoing maxillectomy following head and neck cancer
surgery, the indications for zygomatic implants have expanded considerably.
They are now widely used in the management of severe maxillary atrophy, failed
implant rehabilitation, congenital craniofacial defects, trauma-related
maxillary defects, and complex revision cases. Their ability to avoid bone
grafting, reduce overall treatment time, and facilitate immediate loading has
made them an increasingly popular treatment option.</p>
      <p>Recent
advances in digital dentistry have transformed zygomatic implant therapy.
Cone-beam computed tomography (CBCT), virtual surgical planning,
computer-guided implant placement, dynamic navigation systems, intraoral
scanning, CAD/CAM prosthetics, and artificial intelligence-assisted planning
have significantly improved surgical precision and prosthetic outcomes while
reducing complications. Furthermore, modifications in surgical
techniques—including intrasinus, extrasinus, sinus slot, and zygoma anatomy-guided
approaches (ZAGA)—allow clinicians to tailor implant placement according to
individual patient anatomy, improving soft tissue health and prosthetic
emergence profiles.<sup>4-6</sup></p>
      <p>The purpose
of this review is to comprehensively summarize the current evidence regarding
zygomatic implants, including their historical evolution, anatomical
considerations, indications, surgical techniques, digital workflow, prosthetic
rehabilitation, clinical outcomes, complications, and future developments.</p>
      <p><bold>Indications
for Zygomatic Implants: </bold>Zygomatic
implants are indicated for patients with severe maxillary bone deficiency in
whom conventional implant placement is not possible without extensive bone
augmentation. They provide a graftless alternative for rehabilitating the
severely atrophic maxilla by utilizing the dense zygomatic bone for primary
stability. Common indications include severe edentulous maxillary atrophy
(Cawood and Howell Class V or VI), failed implant or bone graft procedures,
maxillary defects following tumor resection or trauma, congenital craniofacial
anomalies such as cleft palate, and extensive posterior maxillary bone loss
with sinus pneumatization. They are also suitable for patients who are
medically unfit for bone grafting or prefer shorter treatment times. When
combined with conventional anterior implants, zygomatic implants provide stable
support for full-arch fixed prostheses and facilitate immediate loading in
appropriately selected case.<sup>4,7</sup></p>
      <p><bold>Implant
Design: </bold>Zygomatic
implants differ considerably from conventional dental implants because they are
specifically designed to traverse the maxillary sinus and engage the dense
zygomatic bone. Their unique geometry enables secure anchorage even in the
absence of adequate alveolar bone.</p>
      <p>Modern
zygomatic implants are manufactured from commercially pure titanium or titanium
alloy and are available in lengths ranging from approximately 30 to 60 mm,
depending on patient anatomy. The apical threaded portion, typically around 4.0
mm in diameter, is designed to achieve firm fixation within the zygomatic bone,
whereas the coronal portion is slightly wider (approximately 4.5–5.0 mm) to
enhance stability at the crestal level.</p>
      <p>Unlike
conventional implants, zygomatic implants possess a 45° angulated prosthetic
platform, facilitating proper prosthetic emergence despite their oblique
trajectory through the maxilla. Contemporary implant systems incorporate
moderately rough or oxidized surfaces produced through sandblasting, acid
etching, or anodization to enhance osseointegration and long-term stability.</p>
      <p>Recent
design innovations include platform-switching concepts, improved thread
geometry, tapered apical configurations, and soft tissue-friendly collar
designs that reduce bacterial accumulation and improve peri-implant tissue
health. Several manufacturers also provide customized abutments and digital
prosthetic components compatible with CAD/CAM workflows.<sup>7</sup></p>
      <p><bold>The
Zygomatic Bone as an Anchorage Site: </bold>The zygomatic bone serves as the
principal anchorage site for zygomatic implants because of its dense cortical
architecture and favorable anatomical characteristics. Anatomically, the zygoma
resembles a pyramidal structure that provides excellent bone quality and
sufficient volume for achieving primary implant stability.</p>
      <p>Histological
studies have demonstrated that the zygomatic bone consists predominantly of
dense cortical bone with well-organized trabecular architecture and bone
density approaching 98%, making it one of the strongest bones of the
craniofacial skeleton. This exceptional density contributes to excellent
primary stability, which is essential for immediate loading protocols and
long-term implant success.</p>
      <p>The
zygomatic bone has long been utilized in maxillofacial surgery as a stable
anchorage site for fixation of facial fractures using miniplates and screws. It
is also widely employed in orthodontics as a source of skeletal anchorage using
temporary anchorage devices (TADs) and miniplates to facilitate complex tooth
movements. In maxillofacial prosthetic rehabilitation, extraoral implants
placed in the zygoma provide retention for orbital, nasal, and auricular
prostheses following ablative surgery.</p>
      <p>Following
maxillectomy, zygomatic implants may be combined with conventional anterior
implants to support fixed or removable implant-supported prostheses, restoring
mastication, speech, facial aesthetics, and patient confidence. Cadaveric and
radiographic studies have shown that the average thickness and dimensions of
the zygomatic body provide adequate bone volume for secure implant anchorage
while maintaining a safe distance from adjacent anatomical structures.</p>
      <p>The success
of zygomatic implants relies on careful preoperative evaluation using cone-beam
computed tomography (CBCT), which allows accurate assessment of zygomatic bone
volume, sinus anatomy, implant trajectory, and the relationship to critical
structures such as the orbit and infraorbital nerve. With modern digital
planning and navigation systems, clinicians can maximize the advantages of the
zygomatic bone while minimizing surgical complications, making it one of the
most reliable anchorage sites in contemporary implant dentistry.<sup>8,9</sup></p>
      <p><bold>Patient
Selection, Pretreatment Assessment, and Digital Treatment Planning: </bold>Successful zygomatic
implant rehabilitation depends on careful patient selection, thorough
pretreatment assessment, and meticulous digital planning. Ideal candidates
include patients with severe maxillary atrophy, failed implant or bone graft
procedures, maxillary defects due to trauma or tumor resection, and those
requiring graftless full-arch rehabilitation with immediate loading.
Contraindications include active sinus disease, uncontrolled systemic
conditions, poor oral hygiene, heavy smoking, severe bruxism, inadequate
zygomatic bone, and patients unable to maintain long-term follow-up.</p>
      <p>Pretreatment
evaluation involves comprehensive clinical and radiographic assessment.
Clinical examination should assess residual ridge anatomy, occlusion, soft
tissue condition, restorative space, and oral hygiene. Cone-beam computed
tomography (CBCT) is the imaging modality of choice for evaluating residual
bone volume, zygomatic bone anatomy, maxillary sinus condition, implant
trajectory, and proximity to vital structures. Digital planning using CBCT,
intraoral scanning, and virtual implant planning software enables
prosthetically driven implant positioning, improves surgical accuracy, and
minimizes complications, making it an essential component of modern zygomatic
implant therapy.<sup>10,11</sup></p>
      <p><bold>Digital
Treatment Planning: </bold>Digital
technology has revolutionized zygomatic implant therapy by improving surgical
precision, reducing complications, and enhancing prosthetic outcomes. Modern
digital workflows integrate diagnostic imaging, virtual planning, guided
surgery, and CAD/CAM prosthetic fabrication into a comprehensive treatment
protocol.</p>
      <p>The digital
workflow generally includes:</p>
      <p>Intraoral or laboratory
     scanning to obtain digital dental models.</p>
      <p>CBCT acquisition for
     three-dimensional evaluation of the maxilla and zygomatic bone.</p>
      <p>Image fusion by superimposing
     CBCT data with intraoral scans.</p>
      <p>Virtual implant positioning
     using specialized planning software.</p>
      <p>Prosthetically driven implant
     planning based on the desired final restoration.</p>
      <p>Fabrication of
     patient-specific surgical guides through 3D printing or milling.</p>
      <p>Computer-guided or dynamic
     navigation-assisted implant placement.</p>
      <p>CAD/CAM fabrication of
     provisional and definitive implant-supported prostheses.</p>
      <p>Dynamic
navigation systems provide real-time tracking of surgical drills, allowing
greater flexibility than static guides while improving implant accuracy.
Robotic-assisted implant placement and augmented reality navigation are
emerging technologies that may further enhance surgical precision in the
future.</p>
      <p>Artificial
intelligence (AI) is also increasingly being incorporated into implant planning
software. AI algorithms can assist in anatomical landmark identification,
segmentation of CBCT images, automated implant positioning, risk assessment,
and prediction of treatment outcomes, thereby improving efficiency and reducing
operator-dependent variability.<sup>12-14</sup></p>
      <sec id="S1a">
        <title>Advantages of Digital Planning</title>
        <p>Improved surgical accuracy and
     safety.</p>
        <p>Better visualization of
     critical anatomical structures.</p>
        <p>Prosthetically driven implant
     placement.</p>
        <p>Reduced risk of sinus and
     orbital complications.</p>
        <p>Shorter surgical time.</p>
        <p>Improved prosthetic fit and
     long-term clinical outcomes.</p>
        <p><bold>Surgical
Procedure: </bold>Zygomatic
implant surgery is a technically demanding procedure that differs significantly
from conventional implant placement because the implant traverses the maxillary
sinus or its lateral wall to engage the body of the zygomatic bone. Successful
treatment depends on detailed anatomical assessment, prosthetically driven
planning, and precise surgical execution. Advances in digital technology have
substantially improved the safety and predictability of this procedure by
enabling three-dimensional planning, guided implant placement, and dynamic
navigation.</p>
        <p>The surgery
may be performed under local anesthesia with conscious sedation or under
general anesthesia, depending on the complexity of the case, the number of
implants planned, patient anxiety, and associated reconstructive procedures.
Strict aseptic protocols are mandatory throughout the procedure to minimize
postoperative infection.</p>
        <p>Following
administration of anesthesia, a crestal incision with bilateral posterior
releasing incisions is made to expose the maxillary alveolar ridge, lateral
wall of the maxilla, zygomatic buttress, and anterior aspect of the zygomatic
bone. Careful reflection of the full-thickness mucoperiosteal flap provides
adequate surgical access while preserving soft tissue integrity for
tension-free closure.</p>
        <p>The implant
trajectory is established based on the patient's individual anatomy.
Contemporary treatment philosophies such as the Zygoma Anatomy-Guided Approach
(ZAGA) recommend customizing the implant path according to the morphology of
the maxillary wall and zygomatic buttress rather than following a single
standardized route. Depending on anatomical conditions, implants may be placed
using intrasinus, extrasinus, or extramaxillary approaches, each offering
specific prosthetic and biological advantages.</p>
        <p>Sequential
osteotomy preparation is carried out using specially designed long drills under
continuous sterile saline irrigation to prevent thermal injury. Osteotomy
preparation proceeds from the residual alveolar crest toward the zygomatic body
while maintaining the predetermined angulation. In many centers,
computer-generated surgical guides or dynamic navigation systems are employed
to enhance drilling accuracy and reduce the risk of damage to adjacent
anatomical structures such as the orbit, infraorbital nerve, and maxillary
sinus.</p>
        <p>Implant
length is selected according to the planned trajectory and zygomatic bone
dimensions, typically ranging from 30 to 60 mm. High primary stability is
achieved by engaging the dense cortical bone of the zygoma, frequently
exceeding insertion torque values required for immediate loading. Depending on
the treatment protocol, conventional implants may simultaneously be placed in
the anterior maxilla to support a cross-arch prosthesis.</p>
        <p>After
implant insertion, multi-unit abutments are connected to correct implant
angulation and establish an appropriate prosthetic platform. Flap closure is
performed with interrupted or mattress sutures to obtain tension-free primary
wound healing. Most contemporary protocols advocate immediate or early loading
with a screw-retained provisional prosthesis when adequate implant stability is
achieved, allowing rapid restoration of esthetics, speech, and masticatory
function.</p>
        <p>Recent
technological developments—including robotic-assisted implant placement,
augmented reality visualization, artificial intelligence-assisted planning, and
patient-specific 3D-printed surgical guides—are further improving surgical
precision and reducing operator-dependent variability. Nevertheless, successful
outcomes continue to rely on comprehensive case selection, meticulous surgical
technique, and careful postoperative monitoring.<sup>15,16</sup></p>
        <p><bold>Prosthetic
Rehabilitation: </bold>Prosthetic
rehabilitation represents the final and most critical stage of zygomatic
implant therapy, as long-term treatment success depends not only on implant
survival but also on functional efficiency, esthetic integration, phonetics,
oral hygiene maintenance, and patient satisfaction. Because zygomatic implants
usually emerge more palatally than conventional implants, prosthetic planning
must be performed before surgery to ensure an optimal restorative outcome.</p>
        <p>Following
successful osseointegration—or immediately after surgery in immediate loading
protocols—prosthetic impressions are obtained using conventional open-tray
techniques or digital intraoral scanning. Digital workflows incorporating
CAD/CAM technology have significantly improved the precision of prosthesis
fabrication while reducing laboratory errors and treatment time.</p>
        <p>Definitive
restorations are generally fabricated as screw-retained full-arch prostheses
because they facilitate retrievability, maintenance, and management of
biological or mechanical complications. Depending on patient requirements,
prostheses may consist of titanium-acrylic hybrid restorations, monolithic
zirconia, zirconia layered with ceramic, or titanium frameworks veneered with
composite resin. Material selection should consider occlusal forces, esthetic
demands, opposing dentition, and long-term maintenance requirements.</p>
        <p>The
prosthetic design should provide passive fit, favorable occlusal load
distribution, adequate lip support, and sufficient clearance beneath the
prosthesis to permit effective oral hygiene. Cross-arch splinting of zygomatic
and conventional implants distributes functional stresses more evenly across
the prosthetic framework while minimizing cantilever forces. Occlusal schemes
are carefully adjusted to reduce excessive lateral loading and protect both
implants and prosthetic components.</p>
        <p>Patients
treated with immediate loading protocols usually receive a screw-retained
provisional prosthesis within 24–72 hours after surgery. This provisional
restoration restores mastication, speech, facial appearance, and psychological
well-being while allowing soft tissue maturation before fabrication of the
definitive prosthesis.<sup>17-20</sup></p>
        <p><bold>Recent
Advances in Zygomatic Implantology: </bold>Over the past decade, zygomatic
implant therapy has undergone remarkable advancements driven by innovations in
digital dentistry, biomaterials, surgical navigation, and prosthetic
rehabilitation. These developments have enhanced surgical precision, reduced
complications, improved patient comfort, and expanded the indications for
zygomatic implants in the management of complex maxillary defects.</p>
        <p><bold>Digital
Treatment Planning and Virtual Surgery: </bold>Three-dimensional planning using
cone-beam computed tomography (CBCT) combined with intraoral scanning has
revolutionized preoperative assessment. Virtual implant planning software
enables prosthetically driven implant positioning by accurately evaluating the
residual maxillary bone, zygomatic anatomy, maxillary sinus, and adjacent vital
structures. This digital workflow facilitates precise implant angulation,
optimal prosthetic emergence, and predictable treatment outcomes while
minimizing surgical risks.<sup>21</sup></p>
        <p><bold>Static
Guided Surgery: </bold>Computer-aided
design and computer-aided manufacturing (CAD/CAM) technology has enabled the
fabrication of patient-specific surgical guides. Static surgical guides assist
clinicians in reproducing the preplanned implant trajectory with greater
accuracy, particularly in anatomically challenging cases. Guided surgery
reduces operative time, improves implant positioning, and decreases the
likelihood of injury to the orbit, infraorbital nerve, and maxillary sinus.<sup>22</sup></p>
        <p><bold>Dynamic
Navigation Systems: </bold>Dynamic
computer-assisted navigation provides real-time tracking of surgical drills
during implant placement. Unlike static guides, navigation systems allow
intraoperative modifications according to clinical findings while continuously
displaying drill position relative to the patient's anatomy. Several studies
have demonstrated improved angular accuracy, reduced deviation at implant entry
and apex, and enhanced surgical confidence with navigation-assisted zygomatic
implant placement.<sup>23</sup></p>
        <p><bold>Zygoma
Anatomy-Guided Approach (ZAGA): </bold>The introduction of the Zygoma Anatomy-Guided Approach
represents one of the most significant conceptual advances in zygomatic implant
surgery. Rather than using a standardized implant pathway, ZAGA individualizes
implant placement according to each patient's maxillary wall morphology and
zygomatic anatomy. This patient-specific approach reduces sinus complications,
improves soft tissue health, enhances prosthetic emergence profiles, and
provides superior long-term functional outcomes.<sup>24</sup></p>
        <p><bold>Improved
Implant Surface Technology: </bold>Modern zygomatic implants incorporate moderately
rough, sandblasted, acid-etched, or anodized titanium surfaces that enhance
osseointegration by promoting faster bone formation and stronger bone-implant
contact. Optimized thread geometry and tapered implant designs further improve
primary stability while reducing insertion trauma.<sup>25</sup></p>
        <p><bold>CAD/CAM
Prosthetic Rehabilitation: </bold>Digital
prosthodontics has significantly improved the precision and efficiency of
zygomatic implant rehabilitation. Intraoral scanners, digital impressions,
CAD/CAM frameworks, and monolithic zirconia prostheses provide excellent
passive fit, improved esthetics, reduced laboratory errors, and simplified
maintenance. Customized multi-unit abutments further optimize prosthetic
alignment despite the angulated trajectory of zygomatic implants.<sup>26</sup></p>
        <p><bold>Robotic
and Augmented Reality-Assisted Surgery: </bold>Robotic-assisted implant placement
and augmented reality (AR) navigation represent the next generation of implant
surgery. These technologies provide enhanced visualization, precise instrument
guidance, and improved hand–eye coordination, potentially reducing
operator-dependent variability. Although currently limited to specialized
centers, these innovations are expected to become increasingly integrated into
routine clinical practice.<sup>27</sup></p>
        <p><bold>Future
Perspectives: </bold>Future
developments in zygomatic implantology are likely to focus on fully digital
workflows, AI-assisted diagnosis, robotic navigation, smart implant surfaces
with antimicrobial coatings, bioactive surface modifications, patient-specific
implant designs, and regenerative approaches that combine tissue engineering
with implant rehabilitation. These innovations are expected to further improve
treatment predictability, reduce complications, and enhance long-term clinical
outcomes.</p>
      </sec>

    </sec>

    <sec id="S2">
      <title>Conclusion</title>
      <p>Zygomatic implants have become a predictable and
effective treatment option for the rehabilitation of patients with severe
maxillary atrophy and complex maxillary defects. Their ability to provide
stable anchorage without extensive bone grafting reduces treatment time,
surgical morbidity, and overall cost while enabling immediate loading in
selected cases. Advances in digital planning, guided surgery, implant design,
and prosthetic rehabilitation have further improved clinical outcomes and
long-term success.</p>
    </sec>

  </body>

  <back>

    <ref-list>
      <title>References</title>

      <ref id="R1">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Davó</surname><given-names>R., Bankauskas, S., Laurinčikas, R., Koçyigit, I. D</given-names></name>
            <name><surname>Mate Sanchez de Val</surname><given-names>J. E</given-names></name>
          </person-group>
          <article-title>Clinical performance of zygomatic implants: Retrospective multicenter study. <italic>Journal of Clinical Medicine, 9</italic>(2), 480</article-title>
          <year>2020</year>
          <pub-id pub-id-type="doi">10.3390/jcm9020480</pub-id>
        </element-citation>
      </ref>

      <ref id="R2">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Esposito</surname><given-names>M</given-names></name>
            <name><surname>Worthington</surname><given-names>H. V</given-names></name>
          </person-group>
          <article-title>Interventions for replacing missing teeth: Dental implants in zygomatic bone for the rehabilitation of the severely deficient edentulous maxilla. <italic>Cochrane Database of Systematic Reviews</italic>, 2013, CD004151</article-title>
          <year>2013</year>
          <pub-id pub-id-type="doi">10.1002/14651858.CD004151.pub3</pub-id>
        </element-citation>
      </ref>

      <ref id="R3">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Davó</surname><given-names>R</given-names></name>
          </person-group>
          <article-title>Sinus reactions to zygomatic implants</article-title>
          <source>In C. Aparicio (Ed.)</source>
          <year>2012</year>
        </element-citation>
      </ref>

      <ref id="R4">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Aeran</surname><given-names>H., Singh, G., Seth, J</given-names></name>
            <name><surname>Agarwal</surname><given-names>A</given-names></name>
          </person-group>
          <article-title>Zygomatic implants: Changing face of implant dentistry. <italic>International Journal of Oral Health Dentistry, 8</italic>(1), 5–8</article-title>
          <year>2022</year>
        </element-citation>
      </ref>

      <ref id="R5">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Breine</surname><given-names>U</given-names></name>
            <name><surname>Brånemark</surname><given-names>P. I</given-names></name>
          </person-group>
          <article-title>Reconstruction of alveolar jawbone: An experimental and clinical study of immediate and preformed autologous bone grafts in combination with osseointegrated implants. <italic>Scandinavian Journal of Plastic and Reconstructive Surgery, 14</italic>(1), 23–48</article-title>
          <year>1980</year>
        </element-citation>
      </ref>

      <ref id="R6">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Isaksson</surname><given-names>S., Ekfeldt, A., Alberius, P</given-names></name>
            <name><surname>Blomqvist</surname><given-names>J. E</given-names></name>
          </person-group>
          <article-title>Early results from reconstruction of severely atrophic (Class VI) maxillas by immediate endosseous implants in conjunction with bone grafting and Le Fort I osteotomy. <italic>International Journal of Oral and Maxillofacial Surgery, 22</italic>(3), 144–148</article-title>
          <year>1993</year>
        </element-citation>
      </ref>

      <ref id="R7">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Moiduddin</surname><given-names>K., Mian, S. H., Umer, U., Alkhalefah, H., Ahmed, F</given-names></name>
            <name><surname>Hashmi</surname><given-names>F. H</given-names></name>
          </person-group>
          <article-title>Design, analysis, and 3D printing of a patient-specific polyetheretherketone implant for the reconstruction of zygomatic deformities. <italic>Polymers, 15</italic>(4), 886</article-title>
          <year>2023</year>
          <pub-id pub-id-type="doi">10.3390/polym15040886</pub-id>
        </element-citation>
      </ref>

      <ref id="R8">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Le</surname><given-names>M. N., Tran, T. M., Nguyen, P. N., Vo, H. C</given-names></name>
            <name><surname>Tran</surname><given-names>L. H</given-names></name>
          </person-group>
          <article-title>Optimal bone-implant contact sites in the zygomatic region for quad zygomatic implants placement: A retrospective study in Vietnamese patients on CBCT. <italic>BDJ Open, 11</italic>(1), 61</article-title>
          <year>2025</year>
          <pub-id pub-id-type="doi">10.1038/s41405-025-00327-7</pub-id>
        </element-citation>
      </ref>

      <ref id="R9">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Aalam</surname><given-names>A. A., Krivitsky, A</given-names></name>
            <name><surname>Kurtzman</surname><given-names>G. M</given-names></name>
          </person-group>
          <article-title>Decision making with zygomatic and pterygoid dental implants in the severely atrophic maxilla: A narrative review. <italic>Dental Review, 2</italic>(3), 100054</article-title>
          <year>2022</year>
          <pub-id pub-id-type="doi">10.1016/j.dentre.2022.100054</pub-id>
        </element-citation>
      </ref>

      <ref id="R10">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Chen</surname><given-names>J., Shen, Y., Tao, B., Wu, Y</given-names></name>
            <name><surname>Wang</surname><given-names>F</given-names></name>
          </person-group>
          <article-title>A fully digital planning protocol for dynamic computer-assisted zygomatic implant surgery based on virtual surgery simulation: A dental technique. <italic>The Journal of Prosthetic Dentistry, 134</italic>(5), 1524–1529</article-title>
          <year>2025</year>
          <pub-id pub-id-type="doi">10.1016/j.prosdent.2025.05.018</pub-id>
        </element-citation>
      </ref>

      <ref id="R11">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Gao</surname><given-names>B. X., Iglesias-Velázquez, O., Tresguerres, F. G., Rodríguez González Cortes, A., Tresguerres, I. F., Ortega Aranegui, R., López-Pintor, R. M., López-Quiles, J</given-names></name>
            <name><surname>Torres</surname><given-names>J</given-names></name>
          </person-group>
          <article-title>Accuracy of digital planning in zygomatic implants. <italic>International Journal of Implant Dentistry, 7</italic>(1), 65</article-title>
          <year>2021</year>
          <pub-id pub-id-type="doi">10.1186/s40729-021-00348-3</pub-id>
        </element-citation>
      </ref>

      <ref id="R12">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Kafedzhieva</surname><given-names>A., Vlahova, A</given-names></name>
            <name><surname>Chuchulska</surname><given-names>B</given-names></name>
          </person-group>
          <article-title>Digital technologies in implantology: A narrative review. <italic>Bioengineering, 12</italic>(9), 927</article-title>
          <year>2025</year>
          <pub-id pub-id-type="doi">10.3390/bioengineering12090927</pub-id>
        </element-citation>
      </ref>

      <ref id="R13">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Mangano</surname><given-names>F., Shibli, J. A</given-names></name>
            <name><surname>Fortin</surname><given-names>T</given-names></name>
          </person-group>
          <article-title>Digital dentistry: New materials and techniques. <italic>International Journal of Dentistry, 2016</italic>, 5261247</article-title>
          <year>2016</year>
          <pub-id pub-id-type="doi">10.1155/2016/5261247</pub-id>
        </element-citation>
      </ref>

      <ref id="R14">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Att</surname><given-names>W., Witkowski, S</given-names></name>
            <name><surname>Strub</surname><given-names>J. R</given-names></name>
          </person-group>
          <article-title>Digital workflow in reconstructive dentistry. <italic>Quintessence International, 50</italic>, 538–550</article-title>
          <year>2019</year>
        </element-citation>
      </ref>

      <ref id="R15">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Candel-Martí</surname><given-names>E., Carrillo-García, C., Peñarrocha-Oltra, D</given-names></name>
            <name><surname>Peñarrocha-Diago</surname><given-names>M</given-names></name>
          </person-group>
          <article-title>Rehabilitation of atrophic posterior maxilla with zygomatic implants: Review. <italic>Journal of Oral Implantology, 38</italic>(5), 653–657</article-title>
          <year>2012</year>
        </element-citation>
      </ref>

      <ref id="R16">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Duarte</surname><given-names>L. R., Filho, H. N., Francischone, C. E., Peredo, L. G</given-names></name>
            <name><surname>Brånemark</surname><given-names>P. I</given-names></name>
          </person-group>
          <article-title>The establishment of a protocol for the total rehabilitation of atrophic maxillae employing four zygomatic fixtures in an immediate loading system: A 30-month clinical and radiographic follow-up. <italic>Clinical Implant Dentistry and Related Research, 9</italic>(4), 186–196</article-title>
          <year>2007</year>
        </element-citation>
      </ref>

      <ref id="R17">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Fernandes</surname><given-names>G., Aras, M. A., Coutinho, I., Da Costa, G. C</given-names></name>
            <name><surname>Karthikeyan</surname><given-names>P</given-names></name>
          </person-group>
          <article-title>Zygomatic implant rehabilitation: A prosthodontic driven approach: A review. <italic>International Journal of Science &amp; Healthcare Research, 9</italic>(2), 1–7</article-title>
          <year>2024</year>
        </element-citation>
      </ref>

      <ref id="R18">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Ponnusamy</surname><given-names>S</given-names></name>
            <name><surname>Miloro</surname><given-names>M</given-names></name>
          </person-group>
          <article-title>A novel prosthetically driven workflow using zygomatic implants: The restoratively aimed zygomatic implant routine. <italic>Journal of Oral and Maxillofacial Surgery, 78</italic>(9), 1518–1528</article-title>
          <year>2020</year>
          <pub-id pub-id-type="doi">10.1016/j.joms.2020.04.028</pub-id>
        </element-citation>
      </ref>

      <ref id="R19">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Aparicio</surname><given-names>C., Polido, W. D</given-names></name>
            <name><surname>Zarrinkelk</surname><given-names>H. M</given-names></name>
          </person-group>
          <article-title>The zygoma anatomy-guided approach for placement of zygomatic implants. <italic>Atlas of the Oral and Maxillofacial Surgery Clinics of North America, 29</italic>(2), 203–231</article-title>
          <year>2021</year>
          <pub-id pub-id-type="doi">10.1016/j.cxom.2021.05.004</pub-id>
        </element-citation>
      </ref>

      <ref id="R20">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Gandhi</surname><given-names>N., Gandhi, S., Talwar, H</given-names></name>
            <name><surname>Dhawan</surname><given-names>K</given-names></name>
          </person-group>
          <article-title>Zygomatic implant-supported prosthetic rehabilitation of a patient with Brown et al</article-title>
          <source>Class IIc maxillary defect: A clinical report. &lt;italic&gt;The Journal of Indian Prosthodontic Society</source>
          <year>2022</year>
          <pub-id pub-id-type="doi">10.4103/jips.jips_347_21</pub-id>
        </element-citation>
      </ref>

      <ref id="R21">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Kurt Bayrakdar</surname><given-names>S., Orhan, K., Bayrakdar, I. S., Bilgir, E., Ezhov, M., Gusarev, M</given-names></name>
            <name><surname>Shumilov</surname><given-names>E</given-names></name>
          </person-group>
          <article-title>A deep learning approach for dental implant planning in cone-beam computed tomography images. <italic>BMC Medical Imaging, 21</italic>(1), 86</article-title>
          <year>2021</year>
          <pub-id pub-id-type="doi">10.1186/s12880-021-00616-3</pub-id>
        </element-citation>
      </ref>

      <ref id="R22">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Berta</surname><given-names>G. M., Luigi, C., Miguel, P. D</given-names></name>
            <name><surname>Carlos</surname><given-names>B. J</given-names></name>
          </person-group>
          <article-title>Prospective clinical study on the accuracy of static computer-assisted implant surgery in patients with distal free-end implants: Conventional versus CAD-CAM surgical guides. <italic>Clinical Oral Implants Research, 36</italic>(3), 314–324</article-title>
          <year>2025</year>
        </element-citation>
      </ref>

      <ref id="R23">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Matvijenko</surname><given-names>K</given-names></name>
            <name><surname>Borusevičius</surname><given-names>R</given-names></name>
          </person-group>
          <article-title>Comparison of dynamic navigation systems in dental implantology: A systematic literature review of in vitro studies. <italic>International Journal of Oral and Maxillofacial Surgery, 54</italic>(7), 647–656</article-title>
          <year>2025</year>
        </element-citation>
      </ref>

      <ref id="R24">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Aparicio</surname><given-names>C., Polido, W. D</given-names></name>
            <name><surname>Zarrinkelk</surname><given-names>H. M</given-names></name>
          </person-group>
          <article-title>The zygoma anatomy-guided approach for placement of zygomatic implants. <italic>Atlas of the Oral and Maxillofacial Surgery Clinics of North America, 29</italic>(2), 203–231</article-title>
          <year>2021</year>
          <pub-id pub-id-type="doi">10.1016/j.cxom.2021.05.004</pub-id>
        </element-citation>
      </ref>

      <ref id="R25">
        <element-citation publication-type="journal">
          <person-group person-group-type="author">
            <name><surname>Kligman</surname><given-names>S., Ren, Z., Chung, C. H., Perillo, M. A., Chang, Y. C., Koo, H., Zheng, Z</given-names></name>
            <name><surname>Li</surname><given-names>C</given-names></name>
          </person-group>
          <article-title>The impact of dental implant surface modifications on osseointegration and biofilm formation. <italic>Journal of Clinical Medicine, 10</italic>(8), 1641</article-title>
          <year>2021</year>
          <pub-id pub-id-type="doi">10.3390/jcm10081641</pub-id>
        </element-citation>
      </ref>

      <ref id="R26">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Kafedzhieva</surname><given-names>A., Vlahova, A</given-names></name>
            <name><surname>Chuchulska</surname><given-names>B</given-names></name>
          </person-group>
          <article-title>Digital technologies in implantology: A narrative review. <italic>Bioengineering, 12</italic>(9), 927</article-title>
          <year>2025</year>
          <pub-id pub-id-type="doi">10.3390/bioengineering12090927</pub-id>
        </element-citation>
      </ref>

      <ref id="R27">
        <element-citation publication-type="book-chapter">
          <person-group person-group-type="author">
            <name><surname>Tao</surname><given-names>B., Fan, X., Wang, F., Chen, X., Shen, Y</given-names></name>
            <name><surname>Wu</surname><given-names>Y</given-names></name>
          </person-group>
          <article-title>Comparison of the accuracy of dental implant placement using dynamic and augmented reality-based dynamic navigation: An in vitro study. <italic>Journal of Dental Sciences, 19</italic>(1), 196–202</article-title>
          <year>2024</year>
          <pub-id pub-id-type="doi">10.1016/j.jds.2023.07.021</pub-id>
        </element-citation>
      </ref>

    </ref-list>

  </back>

</article>
