Abstract
Background: Durable adhesion between restorative materials and dentin is essential for the longevity and clinical success of restorations. Conventional glass ionomer cement (GIC), resin-modified glass ionomer cement (RMGIC), and alkasite restorative materials are widely used because of their fluoride release, chemical bonding potential, and simplified clinical application; however, their comparative bonding performance remains inconclusive. Aim: To compare the shear bond strength (SBS) of conventional GIC, RMGIC, and alkasite restorative material to human dentin. Materials and Methods: Thirty extracted human premolars were sectioned to expose flat mid-coronal dentin surfaces and randomly allocated into three groups (n = 10): Group I—conventional GIC, Group II—RMGIC, and Group III—alkasite restorative material. Restorations were placed according to manufacturers’ instructions using a standardized cylindrical mold. After storage in distilled water at 37 °C for 24 hours, specimens were subjected to shear bond strength testing using a universal testing machine at a cross-head speed of 1 mm/min. SBS values were calculated in megapascals (MPa) and statistically analyzed using one-way analysis of variance followed by Tukey’s post-hoc test (α = 0.05). Results: Alkasite restorative material demonstrated the highest mean shear bond strength (14.06 ± 1.87 MPa), followed by RMGIC (11.52 ± 1.74 MPa) and conventional GIC (8.94 ± 1.58 MPa). The differences among the three groups were statistically significant (p < 0.001). Conclusion: Within the limitations of this in-vitro study, alkasite restorative material exhibited superior bonding to dentin compared with both types of glass ionomer cements. Conventional GIC showed the lowest shear bond strength.
KeywordsShear bond strength; glass ionomer cement; resin-modified glass ionomer cement; alkasite; dentin adhesion; restorative dentistry
The full text of this article is available as a PDF.
Download PDF- Fernández, E., Gil, A. C., Caviedes, R., Díaz, L., & Bersezio, C. (2025). Clinical longevity of direct dental restorations: An umbrella review of systematic reviews. Journal of Esthetic and Restorative Dentistry. Advance online publication.
- Perdigão, J. (2020). Current perspectives on dental adhesion: (1) Dentin adhesion—not there yet. Japanese Dental Science Review, 56(1), 190–207.
- Betancourt, D. E., Baldion, P. A., & Castellanos, J. E. (2019). Resin-dentin bonding interface: Mechanisms of degradation and strategies for stabilization of the hybrid layer. International Journal of Biomaterials, 2019, 5268342.
- Lohbauer, U. (2009). Dental glass ionomer cements as permanent filling materials?—Properties, limitations, and future trends. Materials, 3(1), 76–96.
- Nicholson, J. W. (1998). Chemistry of glass-ionomer cements: A review. Biomaterials, 19, 485–494.
- Wilson, A. D., & McLean, J. W. (1988). Glass-ionomer cement. Quintessence Publishing.
- Genaro, L. E., Anovazzi, G., Hebling, J., & Zuanon, A. C. C. (2020). Glass ionomer cement modified by resin with incorporation of nanohydroxyapatite: In vitro evaluation of physical-biological properties. Nanomaterials, 10(7), 1412.
- Bhavana, K., Uloopi, K. S., Vinay, C., Chaitanya, P., Ramesh, M. V., & Ahalya, P. (2024). A randomized controlled trial evaluating the clinical performance of bioactive restorative material and resin-modified glass ionomer cement in carious primary molar restorations. International Journal of Clinical Pediatric Dentistry, 17(10), 1109–1113.
- Mhole, M., Tandon, S., Gupta, S., Gosavi, H., Ali, A. R., & Kaul, M. (2025). Evaluation of clinical efficacy of Cention N and Tetric N-Ceram in class I carious lesions in primary mandibular molars. Journal of Oral Biology and Craniofacial Research, 15(6), 1231–1237.
- Adsul, P. S., Dhawan, P., Tuli, A., Khanduri, N., & Singh, A. (2022). Evaluation and comparison of physical properties of Cention N with other restorative materials in artificial saliva: An in vitro study. International Journal of Clinical Pediatric Dentistry, 15(3), 350–355.
- Menezes-Silva, R., Cabral, R. N., Pascotto, R. C., Borges, A. F. S., Martins, C. C., Navarro, M. F. L., Sidhu, S. K., & Leal, S. C. (2019). Mechanical and optical properties of conventional restorative glass-ionomer cements: A systematic review. Journal of Applied Oral Science, 27, e2018357.
- Khoroushi, M., & Keshani, F. (2013). A review of glass-ionomers: From conventional glass-ionomer to bioactive glass-ionomer. Dental Research Journal, 10(4), 411–420.
- Tay, W. M., & Lynch, E. (1989). Glass-ionomer (polyalkenoate) cements. Part 1. Development, setting reaction, structure and types. Journal of the Irish Dental Association, 35(2), 53–57.
- Taher, N. M., & Ateyah, N. Z. (2007). Shear bond strength of resin modified glass ionomer cement bonded to different tooth-colored restorative materials. Journal of Contemporary Dental Practice, 8(2), 25–34.
- Prabhakar, A. R., Raj, S., & Raju, O. S. (2003). Comparison of shear bond strength of composite, compomer and resin modified glass ionomer in primary and permanent teeth: An in vitro study. Journal of Indian Society of Pedodontics and Preventive Dentistry, 21(3), 86–94.
- Sulimany, A. M., Aldowsari, M. K., Bin Saleh, S., Alotaibi, S. S., Alhelal, B. M., & Hamdan, H. M. (2024). An in vitro assessment of the shear bond strength of alkasite restorative material in primary molars compared with glass ionomer and resin-modified glass ionomer restorations. Materials, 17(24), 6230.
- Dawood, A. E., Alkhalidi, E. F., & Saeed, M. A. (2024). Shear bond strength between conventional composite resin and alkasite-based restoration used in sandwich technique: An in vitro study. Journal of International Society of Preventive & Community Dentistry, 14(2), 161–166.
Looking up citing articles…